[meta-arago] [tisdk-setup-scripts][PATCH] setup-uboot-env-am335x: run init_console while booting

[Jacob Stiffler]

* Running the init_console routine is needed as all am335x boards do
not use the same console.

Signed-off-by: Jacob Stiffler <j-***@ti.com>
---
setup-uboot-env-am335x.sh | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/setup-uboot-env-am335x.sh b/setup-uboot-env-am335x.sh
index 6950caf..80b0a52 100644
--- a/setup-uboot-env-am335x.sh
+++ b/setup-uboot-env-am335x.sh
@@ -189,7 +189,7 @@ if [ "$kernel" -eq "1" ]; then
do_expect "\"$prompt\"" "send \"setenv ip_method dhcp\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv nfsopts 'nolock,v3,tcp,rsize=4096,wsize=4096'\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv getuenv 'if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
- do_expect "\"$prompt\"" "send setenv bootcmd 'run findfdt; run getuenv; setenv autoload no;dhcp ;tftp \${loadaddr} $kernelimage; tftp \${fdtaddr} \${fdtfile}; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
+ do_expect "\"$prompt\"" "send setenv bootcmd 'run findfdt; run init_console; run getuenv; setenv autoload no;dhcp ;tftp \${loadaddr} $kernelimage; tftp \${fdtaddr} \${fdtfile}; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
else
@@ -198,7 +198,7 @@ if [ "$kernel" -eq "1" ]; then
do_expect "\"$prompt\"" "send \"setenv bootfile $kernelimage\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv ip_method none\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv getuenv 'if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
- do_expect "\"$prompt\"" "send setenv bootcmd 'run findfdt; run getuenv; setenv autoload no; dhcp ; tftp \${loadaddr} $kernelimage; tftp \${fdtaddr} \${fdtfile}; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
+ do_expect "\"$prompt\"" "send setenv bootcmd 'run findfdt; run init_console; run getuenv; setenv autoload no; dhcp ; tftp \${loadaddr} $kernelimage; tftp \${fdtaddr} \${fdtfile}; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
fi
@@ -211,7 +211,7 @@ else
do_expect "\"$prompt\"" "send \"setenv ip_method dhcp\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv nfsopts 'nolock,v3,tcp,rsize=4096,wsize=4096'\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv getuenv 'if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
- do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
+ do_expect "\"$prompt\"" "send setenv bootcmd 'setenv autoload no; mmc rescan; run findfdt; run init_console; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run netargs; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom
else
@@ -219,7 +219,7 @@ else
do_expect "\"$prompt\"" "send \"setenv ip_method none\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv bootfile zImage\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"setenv getuenv 'if mmc rescan; then if run loadbootenv; then run importbootenv; fi; fi;'\"" $cwd/setupBoard.minicom
- do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
+ do_expect "\"$prompt\"" "send setenv bootcmd 'mmc rescan; run findfdt; run init_console; run getuenv; setenv devtype mmc; run loadimage; run loadfdt; run args_mmc; bootz \${loadaddr} - \${fdtaddr}'" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"saveenv\"" $cwd/setupBoard.minicom
do_expect "\"$prompt\"" "send \"boot\"" $cwd/setupBoard.minicom